C.T.Ham #40 Front Stencil
This Stencil is for the front of a Ham #40 Beacon Wall Lamp. Stencils are simple paper cut with a laser cutting machine. We suggest taping the paper stencil to the lamp with blue tape and using a gold leaf pen or paint pen to apply the artwork. Dotting the entire stenciled area with the pen, rather than dragging the pen is highly suggested. It creates a better effect and does not damage the paper stencil which is fragile in many areas. If careful enough, 1 stencil can last a few uses.
Note Stencil was made with a very similar font but was not directly copied from existing artwork.
|Dimensions||10 × 10 × .1 in|
Only logged in customers who have purchased this product may leave a review.