W.T. Kirkman Hooded Reflector

(4 customer reviews)

$45.00 USD

Material *

Painted Finishes are top surface only.

Size *

Notes Field

Description

Another W.T. Kirkman exclusive: All of our hooded reflectors are pitched at 30 degrees to perfectly cast light directly under the lantern to eliminate any shadow, making them ideally suited for use over a desk or table. They are made in our California Shop on hand operated equipment, and are authentic in construction, right down to the hand soldered joints.

  •  Made in U.S.A.

Satisfaction Guaranteed!

  • #1000 Size hood for #76 “Original” – 5 1/8″ across the inside of the ears, 10 outside diameter.
  • #1000 Size hood for #1 Little Champ and #20 Junior – 5 5/8″ across the inside of the ears, 10 3/8″ outside diameter.
  • #1000 Size hood for the #30 Little Wizard – 5 7/8″ across the inside of the ears, 10 3/8″ outside diameter.
  • #1000 Size hood for the #350 Little Giant – 6″ across the inside of the ears, 10 1/2″ outside diameter.
  • #1100 Size hood for the #10 Monarch – 6 1/2″ across the inside of the ears, 11 1/4″ outside diameter.
  • #1200 Size hood for the #2 Champion and #80 Blizzard – 6 7/8″ across the inside of the ears, 12 1/4″ outside diameter.
  • #1400 Size hood for the #2 Champion and #80 Blizzard – 6 7/8″ across the inside of the ears, 14 1/4″ outside diameter.

Additional information

Weight .75 lbs
Dimensions 12 × 12 × 4 in
Material

Brass, Copper, Galvanized

Size

10" (Vermont #11), 10" (Dietz #30), 10" (Dietz #76), 10" (WTK #350 & Dietz #1), 10" (WTK#1 and Dietz #20), 11" (Dietz #10), 12" (WTK #2 & Dietz #8, #70, #80, #90, #2500), 14" (WTK #2 & Dietz #8, #70, #80, #90, #2500) adds $10

4 reviews for W.T. Kirkman Hooded Reflector

  1. Kenneth Santitoro

    Super nicely made product that gives just the right touch in function by shielding the upper light and really compliments the overall appearance of the lantern and is very easy to put on take off at any time. I highly recommend this for at least one of your lanterns.

    • Madison Kirkman

      Thank You Kenneth, I saw your Youtube video yesterday, and I quite liked the look of our hood on the Streamlined Blizzard. Thank You for your Comment!

  2. corbiere1763 (verified owner)

    Great lampshade well made. Been looking for one for quite awhile. Thank you so much.
    Going to look great in our reenacting camp.

    • Madison Kirkman

      Very Good, I am glad you enjoy it!

      -Madison K.

  3. Richard Keistler (verified owner)

    I bought the black shield to match my black Dietz Jupiter 2500. That’s the lantern I use for hanging overhead light, and the shield really aids directing the light where it’s wanted. It’s beautifully made and while certainly not cheap, the workmanship justifies the cost. I like getting what I’ve paid for!

    • Madison Kirkman

      Built by a Tin Smith with over 50 years experience, our Reflectors are Proudly Made in the U.S.A. To note to those reading this comment, Black Reflectors are painted only on the top surface and the underside is left galvanized to reflect the light. We designed the angle of the reflector such that at about 5 feet off of the ground there is little to no shadow directly underneath the lantern.

      Thank You Again for your Comments.

      Best Regards,
      Madison Kirkman

  4. billthecat1991 (verified owner)

    I purchased one for a Dietz 2500, I read the reviews and decided to pull the trigger. I got it painted blue to match the lantern. It came very well packaged (and undamaged), and it fits perfectly and looks and works great! Very pleased!

    • Madison Kirkman

      Thank You Very Much! Glad to be a service to you. I’m glad the blue matched as Dietz’s formula has changed a little through the years, so I’m glad it was a good match.

      Best Regards,
      Madison Kirkman

Only logged in customers who have purchased this product may leave a review.